A 2-Bit 4GS/s Flash A/D Converter in 0.18μm CMOS for an IR-UWB Communication System
A 4GS/s 2-bit non-time-interleaved flash ADC is designed for an IR-UWB (Impulse Radio Ultra Wide Band) receiver. In this flash ADC,implementing differential low-swing operation in analog part and CML (current mode logic) in digital part result in high-speed and low power consumption. Furthermore,because of the low-bit-sampling characteristic of the IR-UWB system,non-time-interleaved structure is used without digital calibration which largely saves the power consumption,chip area and cost. And a differential resistive reference ladder is designed to minimize the inaccuracy of the reference voltage. The proposed ADC dissipates 34mW power from a 1.8V supply while operating at 4GHz. This chip has been fabricated in 0.18 μm 1P6M CMOS process and the ADC achieves 1.86-bit effective number of bits (ENOB) for input signal of lGHz at 4GS/s in simulation of FFT analysis.
UWB flash ADC low-swing CML
Canxing Lu Lu Huang Wenjia Li
Department of Electronic Science and Technology University of Science and Technology of hina,Hefei,A Department of Electronic Science and Technology University of Science and Technology of China,Hefei,
国际会议
9th International Conference on Solid-State and Integrated-Circuit Technology(第9届固态和集成电路国际会议)
北京
英文
1965-1968
2008-10-20(万方平台首次上网日期,不代表论文的发表时间)