会议专题

Influence of sintering additives of transition metals on the properties of gadolinium-doped barium cerate

In the present work the effect of MOx (where M=Cu, Ni, Zn, Fe, Co, Ti) addition on the densification behavior and electrical conductivity of BaCe0.9Gd0.1O3-δ ceramics is investigated. It was found that the small addition of these sintering additives (1 mol% in the B position) reduces both calcination and sintering temperature by ~250℃ and ~150℃, respectively, promoting simultaneously the densification process. The relative density of the doped samples is ~95% in the case of Cu, Ni and Co, ~91% in the case of Zn, Ti and Fe, while in the case of BaCe0.9Gd0.1O3-δ it corresponds to ~86%. The electrical conductivity of the BaCe0.89Gd0.1M0.01O3-δ samples sintered at 1450℃ is comparable to the one of BaCe0.9Gd0.1O3-δ, sintered at 1600 ℃, both in oxidizing and reducing atmospheres. Among them, the Cu-and Zn-containing samples attain significantly higher values of conductivity.

Sintering additives Gadolinium doped barium cerates

E.Gorbova V.Maragou D.Medvedev A.Demin P.Tsiakaras

Institute of High Temperature Electrochemistry, 22 S.Kovalevskoy, 620219 Yekaterinburg, Russia School of Engineering, Dept.of Mechanical Engineering, University of Thessaly, Pedion Areos, 383 34

国际会议

The 16th International Conference on Solid State Ionics(第十六届国际固态离子学会议)

上海

英文

887-890

2007-07-01(万方平台首次上网日期,不代表论文的发表时间)