会议专题

Investigation of anode-supported SOFC with cobalt-containing cathode and GDC interlayer

The YSZ-based anode-supported solid oxide fuel cells were fabricated with Co-containing cathode such as La0.6Sr0.4Co0.2Fe0.8O3 (LSCF), La0.6Sr0.4CoO3 (LSCo) and Sm0.5Sr0.5CoO3 (SSCo). To prevent the interfacial reaction between Co-containing cathodes and YSZ electrolyte, Gd0.1Ce0.9O2 (GDC) interlayer was introduced. According to the analysis of the electrochemical performance, the LSM cathode cell had the maximum power density of around 0.56 W/cm2 at 700℃ whereas the SSCo cathode cell achieved the highest maximum power density of around 1.26 W/cm2. Furthermore, all the Co-containing cathode cells had the smaller polarization resistance than the LSM cathode cell. However, resistive reaction product (such as SrZrO3) between LSCF and YSZ induced the largest ohmic ASR of the unit cell with LSCF cathode, resulted in much lower cell performance than other Co-containing cathode cells.

IT-SOFC LSCF LSCo SSCo GDC interlayer

Hun-Gi Jung Yang-Kook Sun Hwa Young Jung Jong Sung Park Hae-Ryoung Kim Gyeung-Ho Kim Hae-Weon Lee Jong-Ho Lee

Materials Science and Technology Division, Korea Institute of Science and Technology, Seoul 136-791, Department of Chemical Engineering, Hanyang University, Seoul 133-791, Republic of Korea Materials Science and Technology Division, Korea Institute of Science and Technology, Seoul 136-791,

国际会议

The 16th International Conference on Solid State Ionics(第十六届国际固态离子学会议)

上海

英文

1535-1539

2007-07-01(万方平台首次上网日期,不代表论文的发表时间)