会议专题

Analysis of L-Probe Fed Slotted Microstrip Patch Antenna

In this paper, a novel double E-H shaped patch on a relatively thin substrate (about 0.01 λ(0)) is proposed. The design adopts contemporary techniques; L-probe feeding, inverted patch structure with air-filled dielectric, and slotted patch. The composite effect of integrating these techniques and by introducing the novel patch, offer a low profile, broadband, high gain, and compact antenna element. Simulated results indicate that a 21.79% fractional impedance bandwidth is achieved with respect to the centre frequency of 2.065 GHz and the maximum achievable gain of 9.5 dBi. The proposed patch has a compact dimension of 0.544 λ(0)× 0.275 λ(0)(where λ(0) is the guided wavelength of the centre operating frequency). The design is suitable for array applications with respect to a given frequency of 1.84-2.29 GHz.

broadband antenna microstrip patch antenna slotted patch antenna L-probe fed

Mohammad Tariqul Islam Mohammed Nazmus Shakib Norbahiah Misran Baharudin Yatim

Institute of Space Science (ANGKASA)Universiti Kebangsaan Malaysia,Selangor,Malaysia Dept.of Electrical,Electronic and Systems Engineering Universiti Kebangsaan Malaysia,Selangor,Malays Institute of Space Science (ANGKASA) Universiti Kebangsaan Malaysia,Selangor,Malaysia

国际会议

The 11th IEEE International Conference on Communications Systems(第11届电子和电气工程师协会国际通信系统会议)(IEEE ICCS 2008)

广州

英文

2008-11-19(万方平台首次上网日期,不代表论文的发表时间)