Care of PLA Textiles
The appropriate laundering conditions for the care of polylactide (PLA) textiles have been found.One problem with PLA is its poor resistance to hydrolysis and dramatic loss in strength at conditions typically used in textile processing such as alkaline conditions and elevated temperatures.In this study,PLA fabrics underwent 50 home laundering cycles at various pH levels (8 or 10),washing temperatures (35°C or 55°C),and drying conditions (line dry at 21°C/65％ relative humidity or tumble dry at 50 or 70°C).After every 10 laundering cycles,the breaking tenacity,breaking elongation,and modulus of yarns in the PLA fabric were measured.It was found that washing PLA fabrics at pH 8 and 35°C and line drying it at 21°C and 65％ relative humidity resulted in greater retention in mechanical properties than did washing at pH 10 and 55°C and tumble drying at 70°C.The authors therefore recommend the following care instructions for PLA textiles: use mild detergents with relatively low pH (pH 8),machine wash cold (35°C),and line dry.If machine drying is desired,the authors recommend tumble dry at the low heat setting or permanent press setting (50°C).
Care Dyeing Laundering PLA Polylactic Acid Polylactide
David Karst Michelle Hain Yiqi Yang
Department of Textiles,Clothing and Design Department of Textiles,Clothing and Design;Department of Biological Systems Engineering;Nebraska Cen
国际会议
杭州
英文
2008-10-15（万方平台首次上网日期，不代表论文的发表时间）