Synthesis and Properties of CNTs/Natural Rubber Composite
In this study,the carbon nanotubes (CNTs) were dispersed into natural rubber solution in different contents of 0,1,3,5,10 and 20 wt％.The CNTs/natural rubber composites were subsequently attained by evaporating the solvent and vulcanizing the sheet.In order to evaluate the interaction between natural rubber and CNTs,the nanocomposites were studied using SEM and Raman spectroscopy techniques respectively.The G band and G′band of CNTs were observed after conducting CNTs into natural rubber polymer.Additionally,uniaxis tensile test and dynamic mechanical analysis (DMA) measurement were performed.The initial modulus of CNTs/natural rubber composites increased with a slope of about 0.43％Mpa/wt％ in accordance with the result from DMA.
Carbon nanotubes Natural rubber Reinforcement
Hongxia Jiang Toshiaki Natsuki Qingqing Ni
Graduate School of Science and Technology,Shinshu University,Tokida 3-15-1,Ueda City,Nagano386-8567, Dept. of Functional Machinery and Mechanis,Shinshu University,Tokida 3-15-1,Ueda City,Nagano386-8567
国际会议
杭州
英文
2008-10-15（万方平台首次上网日期，不代表论文的发表时间）