Fundamental Tests on Structural Health Monitoring Systems Using RFID Tag with Wire Strain Gages
In this paper,to clarify the applicability of RFID tags with sensors to structural health monitoring systems,fundamental tests were carried out using RFID tags with wire strain gages and built-in memory. Here,an alternative system was used because RFID tags with wire strain gages are under development in Japan. This system has almost identical performance to that of semipassive-type RFID tags and data communication is performed by wireless LAN.Fundamental performances of the wire strain gage were clarified through shaking table tests using two types of two-story specimens. Fundamental characteristics of the proposed system and wire strain gages,and the applicability of RFID tags with wire strain gages to structural health monitoring systems are discussed and clarified based on results of shaking table tests and Fast Fourier Transform (FFT) analyses.
Structural health monitoring Wire strain gage Shaking table tests RFID tag with sensors
Akinori Tani Motoki Ugaji Yuichiro Yamabe
Department of Architecture,Graduate School of Engineering,Kobe University Kobe,657-8501 Japan
国际会议
哈尔滨
英文
27-37
2008-10-11（万方平台首次上网日期，不代表论文的发表时间）