Applications of Laser-Ultrasonics to the Automotive Industry
Laser-ultrasonics, which uses lasers for the generation and detection of ultrasound is now a mature nondestructive technique for evaluation of materials and structures. This technique works at a distance, without surface preparation, and is then specially adapted to inspect moving and hot parts of complex geometrical shapes. Applications of laser-ultrasonics to the automotive industry have been rarely reported, and this paper is aimed to present some applications developed at the Industrial Materials Institute of the National Research Council of Canada. A first application is the evaluation of weld integrity. Welds produced by different methods such as laser stitches, spot welding, friction stir welding as well as conventional MIG welding were tested by the technique, and some examples are presented. A second application that has been explored is the evaluation of the magnesium/aluminum interface of a novel engine crankcase casting, in which delaminated and well bonded zones were clearly separated in the laserultrasonic images. A third application is the measurement of paint thickness, not only when it is dried but also following application when it is still wet. For this application, thickness can be obtained following a spectroscopic analysis of the laser-ultrasonic data. Finally, adhesive bonding is a new trend in the automotive industry and results are presented on the assessment of bond strength.
Laser-ultrasonics Automobile NDT Automobile process control Weld inspection.
A. BLOUIN S. E. KRUGER D. L(E)VESQUE J.-P. MONCHALIN
Industrial Materials Institute, National Research Council of Canada 75 de Mortagne blvd, Boucherville, Quebec, Canada, J4B 6Y4
国际会议
第十七届世界无损检测会议(17th World Conference on Nondestructive Testing)
上海
英文
761-768
2008-10-25（万方平台首次上网日期，不代表论文的发表时间）