ANALYTICAL SIMULATION UTILIZING COLLABORATIVE STRUCTURAL ANALYSIS SYSTEM
A full-scale experiment to simulate collapse of a 4-story steel building was conducted using E-Defense shake table facility. The specimen consists of beams of wide-flange sections, columns of rectangular hollow sections, concrete slabs with deck plates, and column bases with anchor bolts. The collapsing of the specimen was characterized by deteriorating behavior caused by local buckling of column at the first story. This paper deals with the analytical simulation of the specimen based on the collaborative structural analysis (CSA) system. The CSA system is capable of performing highly sophisticated structural analyses utilizing the beneficial features of existing individual structural analysis programs. Several programs are being used to simulate various components of the whole frame. The program, COMPO, is used for analyzing composite beams that consist of steel beam and concrete slab. It can consider the composite action in plus bending, and the crack-opening of concrete slab in minus bending. It can simulate the complex cyclic behavior of composite beams. The general-purpose program, MARC, is used for analyzing columns of rectangular hollow sections. Shell elements are used for modeling to consider the local buckling due to axial force and bending moment. It can simulate the deteriorating post-buckling behavior. The program, NETLYS, is used as a host program. It deals with the global equation of motion, to which numerical information of all sub-structures is involved. The analytical results are compared with test results of shake table. The effects of structural components to overall collapsing behavior of the specimen will be discussed.
collaborative structural analysis numerical analysis local buckling full-scale steel building collapse
M. Tada H. Tamai K. Ohgami S. Kuwahara A. Horimoto
Division of Global Architecture, Osaka University, Osaka, Japan Department of Architecture, Hiroshima Institute of Technology, Hiroshima, Japan Nittetsu Plant Designing Corporation, Fukuoka, Japan Kyoto Institute of Technology, Kyoto, Japan
国际会议
14th World Conference on Earthquake Engineering(第十四届国际地震工程会议)
北京
英文
2008-10-12（万方平台首次上网日期，不代表论文的发表时间）