HYSTERETIC DAMPER DEVICE WITH SYMMETRY FIXED STEEL PLATES.
In the present Project a hysteretic damper system for seismic control is proposed, this damper is based in the use of steel plates with bending yielding. The plate geometry and its connection system are proposed for allow the inelastic range of the material plate even for small amount in the inter story drift, also the sequential work of the damper plates are permitted. This characteristic makes possible the vibration control for small as well as great amplitude vibrations. The design equations for the system are proposed as a function of yielding load and deformation. Experimental cycle load test were conduced for calibrate the design equations, the analytical and experimental results are contrasted and analyzed.
Damper Hysteretic damper Energy dissipation Cyclic loads.
R. Vera P. Girault S. A. Miranda
Professor, Universidad Autonoma del Estado de México / Facultad de Ingeniería, Cerro de Coatepec s/n PAGR S.A., Av. Volcan No. 120, Col. Lomas de Chapultepec, C.P. 11000, México D.F., México. Diseno, Estructuras y Consultoría S.A. de C.V./Juárez No. 1111-D, Col. Universidad, C.P. 50130, Tolu
国际会议
14th World Conference on Earthquake Engineering(第十四届国际地震工程会议)
北京
英文
2008-10-12（万方平台首次上网日期，不代表论文的发表时间）