A PROCEDURE FOR THE CALIBRATION OF PARTIAL SAFETY FACTORS FOR CAPACITY MODELS
Worldwide research has now reached a level of integration where an effort towards the harmonization of procedures is absolutely needed. Such harmonization may regard, for example, the various steps that lead to the definition of capacity models to be included in design codes, specifically: definition of the test setup, quantities to be measured, identification of the basic variables influencing the phenomenon, distinction between average values and other fractiles, disaggregation of the model in different parts accounting for mechanics, fine-tuning and randomnesses, and, finally, assessment of the model against the experimental results. Test results and ensuing model developed according to this procedure would naturally lend themselves to be easily shared among the scientific community and would facilitate the task of calibrating the partial coefficients, with the ambitious aim of attaining a uniform reliability level among all capacity equations. This paper proposes a first attempt towards the harmonization of procedures for the development of capacity design equations to be included in codes and the execution of tests. The procedure developed, is applied to the definition of the debonding strength model for FRP, starting from the model proposed in the Italian Instructions CNR DT 200-2004. The procedure has the aim of evaluate the uncertainties of the assumed model (both of the mechanical model and of the basic variables) to obtain a constant level of structural reliability.
Design assisted by testing capacity models calibration FRP debonding strength experimental tests.
S.Alessandri S. G. Monti S.Santini
Dept. of Structural Engineering and Geotechnics,Sapienza University of Rome,Rome,Italy; Professor,Dept. of Structural Engineering and Geotechnics,Sapienza University of Rome,Rome,Italy Dept. of Structures,University of Roma Tre,Rome,Italy
国际会议
14th World Conference on Earthquake Engineering(第十四届国际地震工程会议)
北京
英文
2008-10-12（万方平台首次上网日期，不代表论文的发表时间）