The approach to monitoring landslide with FBG and BOTDR
FBG and BOTDR are two kind of the most representative distributed optical fiber sensing technology.FBG obtains the strain or the temperature by measuring the change of the reflected light wave length.BOTDR realizes the distributed temperature and strain measurement by measuring the shift size of backward Brillouin scattered light.The sensitivity of FBG sensor is high but it is only measured the discrete distributed sensing spots.The BOTDR sensing part is the optical fiber.Using BOTDR may realize the long distance,the uninterrupted and distributed monitor.But for its technical limit,the measurement distance resolution of BOTDR is not high.Based on this,the authors put forward a notion,BOTDR combines with FBG to monitor landslide.In Canlian landslide,the monitoring optical fiber was laid on the entire landside and BOTDR was used to obtain the outline information of it.FBG was installed at the certain essential spots,the strain fissures,to obtain their strain information.Thus the landside can be monitored from dot to line and future to surface.Finally the completed strain information of the landslide can be obtained.
FBG BOTDR strain landslide monitoring
Yanxin Shi Qing Zhang Xianwei Meng
Geo-detecfion Laboratory,Ministry of Education of China,China University of Geosciences,Beijing 1000 Centre for Hydrogeology and Environmental Geology,CGS,Baoding 071051,China
国际会议
The 3rd International Conference on Environmental and Engineering Geophysics(第三届环境与工程地球物理国际会议)
武汉
英文
618-621
2008-06-15（万方平台首次上网日期，不代表论文的发表时间）