Improvement of Processing Technology for High-grade Massive and Cupriferous Ores of the Talnakh Deposit
The paper describes the results of studies performed with a view to develop an improved technology for processing high-grade massive and cupriferous ores of the Talnakh deposit, the main valuable components being nickel, copper and PGM.The studies main task was production of nickel concentrate with nickel content of approx. 15%,nickel recovery being as high as possible.The studies were performed on two ore samples. One sample was a mix containing high-grade massive (78%) and cupriferous (22%) ores with nickel content of 1.93% and copper content of 3.6%;the other sample was a mix of high-grade ores with nickel content of 2.25% and copper content of 3.72%. Main ore minerals were copper sulfides chalcopyrite and cubanite, their total content being 10.5%～11%, pentlandite (5.2%～6.1%) and pyrrhotite (36.7%～42.9%).Influence of grinding media on pentlandite and pyrrhotite separation results, achieved through combined use of triethylenetetramine (TETA) and sodium sulfite (SS), was also investigated. It is shown, that combined application of TETA/SS in the ratio of 1:2, permits to grind products in metal mill (mild steel) with metal balls (mild steel), achieving results that are similar to those achieved by means of grinding in inert grinding media with TETA/SS ratio of 1:1. Application of the developed technology provided for production of high-grade nickel concentrate with nickel content of 14.7%～15.6%, nickel recovery being 76 %～77%.Earlier experiments performed on the above mentioned ore mix permitted to produce nickel concentrate with nickel content of 10%, nickel recovery being 75.9%. Consequently, nickel content was increased by 4.7%～5.6%, and a higher nickel recovery was achieved. The paper also describes metallurgical results related to nickel, copper and PGM with regard to all processing products.
Flotation High-grade massive ores Cupriferous ores Pentlandite and pyrrhotite separation
I. I. Maximov A. O. Yadryshnikov T. Ye. Koltunova L. A. Otrozhdyonnova S. A. Urnysheva
Mekhanobr Engineering, JSC, Russia
国际会议
XXIV International Mineral Processing Congress(第24届国际矿物加工大会)
北京
英文
1679-1687
2008-09-24（万方平台首次上网日期，不代表论文的发表时间）