Mechanism and Characteristics of Camsellite Flotation
Pure camsellite samples were prepared through crushing, sorting and grinding the high-grade iron-containing camsellite ores from Fengcheng, Liaoning, China. The flotation behaviour of camsellite was studied via a systematic investigation of camsellite flotation recovery changes as a function of choices and dosages of collectors and depressants at different slurry pH.The results showed that at pH 8.5 to 9.5, the recovery of camsellite reached the maximum at 90%～93.5% using dodecylamine as the collector, while under the same condition a recovery of 84%～86% could be achieved with sodium oleate. The adsorption of dodecylamine was not affected by the addition of sodium hexametaphosphate, but the adsorption of sodium oleate could be significantly depressed. This implied that sodium metahexaphosphate could be used as an effective depressant for the other associated minerals during the dodecylamine flotation of camsellite.When starch was used as the depressant, the flotation of camsellite by sodium oleate was almost completely depressed in the alkaline conditions. Significant depressions were also observed when calcium chloride was added in the camsellite-sodium oleate system. The higher the slurry pH is, the stronger the depression.Zeta potential measurements indicated that the flotation was mainly initiated by the electrostatic adsorption of the collector on camsellite. X-ray photoelectron spectrometer (XPS) analysis showed that the adsorption was originated from the electrostatic attraction between the N atom in dodecylamine and B atom in camsellite. Dodecylamine had a higher coverage on the camsellite surface than sodium oleate.
Mechanism Camsellite Flotation
Y. J. Li Y. M. Zhu Y. X. Han
Northeastern University, Shenyang, China
国际会议
XXIV International Mineral Processing Congress(第24届国际矿物加工大会)
北京
英文
1413-1419
2008-09-24（万方平台首次上网日期，不代表论文的发表时间）