Dynamic Analysis and Optimization of Flotation-column Packed Separation Zone
Packing in a flotation colunm is one way to increase separation efficiency and effective descending flotation-column height. In this paper, the difference between filling packing and sieve packing is described, and the flaws of filling packing in flotation columns in industrial application are pointed out. A change of flotation process and its effect on flotation results are reported.Based on sieve-plate filling, a high-efficiency mixed packing mode consisting of screen-plate packing and honeycomb-tube packing has been proposed, with the packing mode optimized in the cyclonic static microbubble flotation column in the separation zone. In the mixed packing mode, the honeycomb tubes are used to reduce the vortex effect at the base of the column and weaken the radial dispersion of jetting bubbles, and the sieve plates are used to comminute bubbles in the separation zone, to lengthen the bubble migration path, and to stabilize the foam layer.The superiority of honeycomb-tube packing is analyzed using bubble-particle collision theory,and the dynamic equations of collision probability are derived. The role of mixed packing in guaranteeing mineral recovery is analyzed by the axial dispersion method, and a dimensionless axial dispersion model is derived. When a high-turbulence flow is maintained, a static separation environment is formed in which secondary mineral processing is rendered more effective. In this way, a nonlinear separation environment is formed in the flotation column.Finally, mixed packing was applied in an industrial test. A large vortex developed at the base of the column. It was observed that the bubbles in the radial flow were homogeneously dispersed, the residence time of the pulp was prolonged, and the froth layer became thick and stable. Based on the test data, it was found that the sieve packing has the potential to yield a product of approximately 25.83% copper concentration with 91.78% recovery from a feed concentration of approximately 0.727%. If mixed packing were used, the product concentration could be further increased to 27.60% from a feed of approximately 0.739% concentration with 93.38% recovery.
Column flotation Flotation bubbles Flotation kinetics Mixed packing
J.T. Liu M. Zhang A. F. Zhai H. J. Zhang Y. T. Wang Y. J. Cao
China School of Chemical Engineering and Technology, China University of Mining & Technology,Xuzhou, State Key Laboratory of Pulp and Paper Engineering, South China University of Technology,Guangzhou,
国际会议
XXIV International Mineral Processing Congress(第24届国际矿物加工大会)
北京
英文
940-945
2008-09-24（万方平台首次上网日期，不代表论文的发表时间）