Study On Printability of Plastic Water-based Gravure Ink

摘要：

Plastic water-based gravure primary inks were prepared. The primary inks were diluted with resin solution which had good compatibility with primary inks. Isopropanol was added to improve the printability of the ink. Effects of pigment/binder ratio、 dispersant、 resin solution and isopropanol on printability of the inks were analyzed. The results showed that the pigment/binder ratio was 2:1, the content of dispersant of 750 was 0.7％, the content of dispersant of 760 was 0.7％, the formulation of mixed resin was 3808:1437:2640=1:O:1, the content of isopropanol was 1％, printability of inks both on PET and BOPP was good.

关键词： Plastic water-based gravure ink Printability Adhesion Proofing density

作者: Chen Yuetao Wei Xanfu Huang Beiqing

作者单位: Beijing Institute of Graphic Communication, Beijing, China

会议类型: 国际会议

会议名称: 第六届影像科学与硬拷贝技术国际会议(ICISH08)(The 6th International Conference on Imaging Science and Hardcopy)

会议地点: 广东湛江

会议语种:英文

页码: 146-150

在线出版日期: 2008-01-10（万方平台首次上网日期，不代表论文的发表时间）