Optimization of Sensor Optics for Industrial Thermal Spray Sensors
For a decade now, industrial sensors have been commercially available to both academia and industry. In general, these sensors measure individual and/or bulk properties of the powders being sprayed. Experience has shown that normally, researchers will tend to favor sensors with high spatial resolution like the DPV 2000, because of the fundamental information they give about the plume structure. Such information is vital for proper gun design and spray parameter optimization. However, for process monitoring applications typically performed with a sensor like the AccuraSpray, it is often more convenient to measure global properties over a wider volume inside the plume. In this case, there is always a tradeoff to be made between spatial resolution and fundamental process understanding. This paper illustrates this point by comparing two optical configurations, one with high spatial resolution and another one with medium resolution. This latter configuration makes use of a cylindrical lens to expand the sensor field of view in a direction perpendicular to the spray direction. Results clearly show that with minor optical modifications such sensors can be tailored to precise industrial requirements.
J. Blain L. Pouliot F. Nadeau M. Lamontagne C. Moreau
Tecnar Automation, St-Bruno, Quebec, Canada National Research Council Canada, Boucherville, Quebec, Canada
国际会议
北京
英文
2007-05-14（万方平台首次上网日期，不代表论文的发表时间）