PREPARATION AND MECHANISM OF NATURAL BRUCITE NANOFIBERS
Test results indicate that brucite fibers could be well dispersed by using OT as the dispersant at the water/solid ratio of 20:1, at the dosage of 15% of fiber quality and in the dispersing duration of 30 minutes. The prepared nanofibers were characterized with a scan electron microscope (SEM) and a transmission electron microscope (TEM). Test results indicate that the prepared single brucite nanofiber was around30nm long in diameter and the talus of non-single brucite nanofibers was about 50nm~150nm long in diameter. Brucite nanofibers may be used as a fortifier for compound such as the SiO2 aerogel super insulating materials. Since brucite is also an excellent fire retardant, brucite nanofibers are expected to be used widely in the high-molecular materials sector.
Brucite Nano-fiber Sodium dioctyl sulfosuccinate (OT) Ultrasonic
Li Xu Wen Ni Xiaoguang Yang Hailong Yang Wei Liu Shiqing Li Juncai Zhao
School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beiji School of Civil and Environmental Engineering, University of Science and Technology Beijing, Beiji
国际会议
海南三亚
英文
2007-01-10(万方平台首次上网日期,不代表论文的发表时间)