CHARACTERIZATION OF PIEZOELECTRIC RESPONSE OF PZT NANOFIBERS
This paper reports the characterization of piezoelectric response of the Lead Zirconate Titanate (PbZr52Ti48O3) PZT nanofibers by three-point bending test using dynamic mechanical analyzer (DMA). PZT nanofibers were fabricated by sol-gel electrospinning process. Thediameters of the fiber obtained were from 50 to 150 nm. The fiber consists of nanocrystal grains with average grain size of 10 nm. Titanium strip was used as substrate to collect the nanofibers for the three-point bending test to demonstrate the piezoresponse. The output voltage from the nanofibers under 0.5% strain was 0.17±0.005V, which was recorded by Labview. These results have shown that PZT nanofibers have great potential for nano sensor and actuator applications.
Shiyou Xu Vinod Challa Yong Shi
Mechanical Engineering Department Stevens Institute of Technology, Hoboken NJ 07030, USA Mechanical Engineering Departmen Stevens Institute of Technology, Hoboken NJ 07030, USA
国际会议
海南三亚
英文
2007-01-10(万方平台首次上网日期,不代表论文的发表时间)