Optimization of spinning conditions and prediction on PET staple fibers melt spinning

摘要：

In this work, the method, in principle of the box complex algorithm was adopted to obtain coefficient of expression of EYS 1.5 which is the elongation corresponding to 1.5 times yielding stress in stress- strain curve. In view of PET staple fibers with 1.56dtex, the relationship between EYS1.5 and spinning conditions including take-up velocity, annealed length, quench air velocity, quench air temperature, extrusion temperature and intrinsic viscosity was obtained. The spinning condition was optimized provided that the as-spun fibers experienced the same values of EYS1.5 and coefficient of variation (CV). The properties of other type staple fibers with 1.33dtex, 1.11dtex and 0.89dtex respectively, were also predicted and verified and the spinning conditions were optimized as well.

关键词： Melt-Spinning Optimization Throughput Spinning condition PET

作者: WANG Chaosheng ZHANG Chuanxiong WANG Huaping

作者单位: State Key Laboratory of Modification of Fiber and Polymer Materials, Donghua University, Shanghai 201620, P. R. China

会议类型: 国际会议

会议名称: 2007年先进纤维与聚合物国际会议

会议地点: 上海

会议语种:英文

页码: 63-65

在线出版日期: 2007-10-15（万方平台首次上网日期，不代表论文的发表时间）