Investigation of Fiber Diameter of Melt Blown Nonwovens Produced by the Inset Die
Melt blowing is used commercially as a one-step process for converting polymer resin directly into a nonwoven mat of microfibers. The inset die is often used to produce polymeric fibers in the melt blowing process. The air jet flow field model for the dual slot inset die is established. The flow field model is solved by using the finite difference method. The numerical computation results of the air velocity distribution coincide with the experimental data. Then the air drawing model of polymers in the melt blowing process established in our previous study is solved with the aid of simulation results of the air jet flow field. The fiber diameter predicted by the air drawing model of polymers tallies well with-the experimental data. The results show the great potential of this research for the computer assisted design of melt blowing technology and equipment.
melt blowing inset die fiber diameter flow field modeling
CHEN Ting ZHANG Chong CHEN Xia LI Liqing
College of Textiles, Donghua University, Shanghai 201620, P. R. China State Key Laboratory for Modif College of Textiles, Donghua University, Shanghai 201620, P. R. China
国际会议
上海
英文
184-187
2007-10-15（万方平台首次上网日期，不代表论文的发表时间）