The Structure Properties ef Polly (ether ester amide) Containing Zinc and its Blending Fiber with PA6
Poly (ether ester amide) containing zinc (called PEEAZ in following) for antistatic agents was synthesized by three-step reactions First three kinds dicarboxylic acid reacted with zinc oxide, respectively. Then three products above reacted with polyethylene glycol and obtained poly (ether ester) containing zinc (called PEEZ), which reacted with caprolactam responsibly and gained three kinds PEEAZ. Adding PEEAZ to PA6 during blend spinning. the blending PA6 fiber with antistatic property was obtained. IR, DSC, TG and XRD was used to study the structure and properties of PEEAZ. Morphology of the blending PA6 fiber was studied bv SEC. The antistatic property and tenacity of blending PA6 fiber was investigated. The result showed that the structure and property of PEEAZ depend on the sort and the content of dicarboxylic acid in PEEAZ. The antistatic property of the fiber had improving with PEEAZ content increasing in the fiber and the n value of- (CH<,2>)<,n>- decreasing in dicarboxylic acid. The fiber had basa-fibrill amphoteric structure and its tensile had maximum with PEEAZ content increasing.
Poly (ether ester amide) containing zinc blending fiber structure properties
GUO Jing SHEN Xinyuan CHEN Wei
State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University, State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University, College of chemical and Material, Dalian Polytechnic University, Dalian 116034, P. R. China
国际会议
上海
英文
497-500
2007-10-15（万方平台首次上网日期，不代表论文的发表时间）