Preparation and properties of borate glass coatings on Ti-based alloy substrates
A series of BaO-La2O3-B2O3 (BLB) glass coats on the Ti-based alloy substrates were developed at different temperatures for different times.The BLB glasses were analyzed by differential thermal analysis (DTA) and thermal mechanical analysis (TMA) to determine the crystallization temperature and coefficients of thermal expansion (CETs) of the glass.The tensile strength and microstructure of the glass coats were analyzed and the effects of the coating condition on the tensile strength and microstructure were discussed.The results show that the CETs of the borate glass at different temperatures match with those of Ti-based alloy,and the difference between the borate glass and Ti-based alloy at each temperature is below 5％.The spreading area in N2 atmosphere is much larger than that in air atmosphere,indicating that N2 atmosphere is helpful for the wetting of borate glass to Ti-based alloy.The tensile strength of the glass coats can reach as high as 28.42 MPa,meeting the requirements for the coat binder.With the increase of coating time,the tensile strength of coats increases firstly while then decreases.The coat prepared at 730 ℃ for 30 min is fairly smooth and complete,while the other coats contain lots of defects such as large or small uncoated region.It is believed that the coating temperature of 730 ℃ and coating time of 30 min are the proper coating conditions to prepare BLB glass coats.
BaO-La2O3-B2O3 glass coating condition Ti-based alloy tensile strength
ZHU Dong-mei LOU Xia LUO Fa XIONG Liang-ming ZHOU Wan-cheng
State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,Xi’an 710072,China
国际会议
2007年国际有色金属大会(International Conference of Nonfereous Materials 2007)(ICNFM)
长沙
英文
2007-11-28（万方平台首次上网日期，不代表论文的发表时间）