2-10 The effect of Si in base steel on the structure of hot-dip zinc coatings

摘要：

The commercial pure iron and Fe-0.1wt. ％Si alloy were galvanized at temperatures in the range of 450-530℃ insteps of 10℃. The results show that the coating of commercial pure iron forms fastest at 480℃, while the Fe-0.1％wt.％Si alloy does at 470℃. There exist some similarities in structures between the two types of hot-dip galvanizing samples formed at the fastest growth temperature. When galvanized above 500~C, the ζ phase disappears and the δ phase becomes the principal phase in the coating of the two kinds of materials. The formation of the ζ phase is determined by immersion temperature and independent on the content of Si. The results indicate that Si can restrain the growth of the δ phase in the coatings.

关键词： hot-dip galvanizing galvanizing temperature coating thickness Si

作者: Peng Bicao Wang Jianhua XiaoBin Su Xuping Yin Fucheng

作者单位: Key Laboratory of Materials Design and Preparation Technology of Hunan Province, Xiangtan University, Xiangtan, 411105, China Institue of Materials design, School of Mechanical Engineering, Xiangtan University, Xiangtan Hunan 411105, China

会议类型: 国际会议

会议名称: 第七届亚太镀锌大会(The 7th Asia Pacific General Galvanizing Conference)(7th APGGC)

会议地点: 北京

会议语种:英文

页码: 117-121

在线出版日期: 2007-09-14（万方平台首次上网日期，不代表论文的发表时间）