Analysis of Multiple Steady-States in a Heat Integrated Distillation Column (HIDiC)
A heat integrated distillation column (HIDiC) is a new and highly energy-efficient distillation process. In the present work, multiple steady-states in HIDiC are analyzed. In HIDiC, the pressure in the rectifying section is kept higher than that in the stripping section by using a compressor to enhance heat transfer from the rectifying section to the stripping section through the wall. Therefore, an energy balance, particularly the influence of the compressor, must be taken into account for the analysis. In this research, two types of operation policies are investigated: P1) constant compressor power and P2) constant pressure ratio. First, the conditions for making multiple steady-states appear are derived on the basis of a first principle model of the HIDiC. Then, the analysis results are validated through simulations. The results show that 1) the instability condition depends largely on the compressor operation policies; 2) in case P1, multiple steady-states appear when the top product is highly pure, the bottom product is relatively impure, vapor flow rate is large, and compressor power is small; 3) in case P2, multiple steady-states appear when the bottom product is highly pure; and 4) multiple steady-states appear in a wider range of operation in case P2 than in case P1.
Multiple steady-states Instability Heat Integrated Distillation Column (HIDiC) Operation
Hiroshi Makita Tomohiro Fukushima Manabu Kano Shinji Hasebe
Department of Chemical Engineering,Kyoto University,Nishikyo-ku,Kyoto 615-8510,Japan
国际会议
西安
英文
2007-08-15（万方平台首次上网日期，不代表论文的发表时间）