Investigation on Interaction Mechanism of Components in Fiction Materials Doping Rare Earths
Semi-metal friction material was applied widely in brake process of traffic and dynamical system. The friction materials with rare earth additive were manufactured by heating press molding process. The effects of different reinforcing fibers and adhesives on the properties of the materials were studied by changing the formula. The results showed that the friction materials with YSM resin adhesive and hybrid fibers (Kevlar pulp and steel fiber) had higher and more stable friction coefficient and lower wear rate. Semi-metal friction materials with rare earths formed iron-rich surface layer in the worn surface, and the mechanisms of wear had obvious differences at typical temperature ranges.
friction materials properties interaction mechanism rare earths
Xu Yue(许越) Xie Jiliang(谢继亮) Lu Liguo(卢立国)
School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Bei School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Bei
国际会议
第五届国际稀土开发与应用研讨会(The Fifth International Conference on Rare Earth Decelopment and Applicatin)
包头
英文
369-372
2007-08-07(万方平台首次上网日期,不代表论文的发表时间)