Synthesis and Photocatalytic Capability of Cr- TiO2 film
(0) A TiO2 catalyst doped by Cr was prepared by the sol-gel method and characterized by UV-2550 and FS. The results reveal that the Cr6+-doped TiO2 film has the higher photocatalytic activity than pure TiO2 film.Introduction Semiconductor photocatalysts, mainly TiO2, have attracted much attention in last decade because of their potential application in the removal of many organic and inorganic pollutants in air or water. Many studies have been carried out on the application and modification of TiO2, and various photocatalytic reactors have been investigated according to respective application demands for the purification of air and water. In the water and wastewater treatment field, slurry reactor is the most common device because of its high specific surface area and good dispersion. However, the use of TiO2 slurry reactor is still limited mainly due to difficult separation of TiO2 particles from treated water. To overcome the problem, Titania beads, TiO2 based thin film, fiberglass loaded with titania, and encapsulated titania within a zeolite framework have been prepared and used in fixed bed. However, the activity of TiO2 photocatalyst is reduced to a considerable extent by these immobilization techniques because the effective surface area of photocatalysts is decreased considerably.The aim of this study is to obtain a magnetically separable photocatalyst, which is stable and easy to be prepared. In the work, Cr as magnetic cores was prepared by liquid catalytic phase transfer method at low temperature, and magnetically separable TiO2- Cr photocatalysts were synthesized. Their physicochemical properties and photocatalytic activity for degradation of methyl orange in water were investigated.
Xiaojuan Lu Duowang Fan Duojin Fan Hongzhong Liu
School of Automation and Electric Engineering, Lanzhou Jiaotong University, Lanzhou 730070, Peoples MOE key lab of Opto-electronic Technology and Intelligence Controll, Lanzhou Jiaotong University, La Lanzhou Dachen Automatic Control System Co., Ltd, Lanzhou 730070, and Peoples Republic of China State Key Laboratory for Manufacturing Systems Engineering, Xian Jiaotong university, Xian 710049,
国际会议
兰州·北京
英文
314-315
2007-07-29（万方平台首次上网日期，不代表论文的发表时间）