Analyzing Input Match Manipulation Based on Comparative Theory
Since thermal plants are multi-input, multi-output and uncertain complex systems, it is important to capture the characteristics of the system for controlling combustion reliably and economically. If the gas of cookery is used as fuel, the input quantity of gas is closely connected with the output quantity of coke plant, so the characteristic of fuel is not steady. The process of combustion must be completely, that is, when the ratio of atmosphere and gas is the setting value, the precision of thermal control is high and the output thermal efficiency can meet the needs of design. The paper uses comparison theory of Lyapunov method to analyze the input ratio of fuel and atmosphere in combustion control system. The balance between adjustment value and set value after affected by outside interference shows that at that time the combustion efficiency is the highest and the thermal value is the steadiest. It analyzes the supply status of fuel and atmosphere by simulating combustion process mode and confirms the validity and stability.
Comparison theory Gas and atmosphere Match Thermal power plants
Gao Xin XI Junjie Yang Gongxun
School of Mechanical Electronic and Information Engineering of China University of Mining and Techno Department of Mechanical-Electrical Engineering,Zhengzhou Institute of Aeronautical Industry Managem School of Mechanical Electronic and Information Engineering of China University of Mining and Techno
国际会议
西安
英文
2007-08-16（万方平台首次上网日期，不代表论文的发表时间）