How implement IEEE 1641 on Signal-Oriented ATS development
This article researches on how to implement IEEE 1641 in Signal-Oriented ATS development. Signal-Oriented ATS is the best choice to achieve the modern ATS designs goals such as instrument interchange; ATE adaptability; faster technology insertion; TPS rehost; TPS interoperation and so on. According to the SignalOriented ATS development process, the signal definition standard and the interface description design are the most important questions required to solve. The uniform signal and measure definition; XML interface description method; object Model interface provided by IEEE 1641 can fulfill all above requirements. An application is offered to explain how to construct a complex signal based on common models which defined in BSC layer of IEEE 1641. And how to description signals schema in XML develop environment is afforded in succession. The signal requirement with textual format in TPL and the corresponding mapping test program codes in VB are provided subsequently. Finally, a conclusion is gived with some deficiencies of this implement in practice.
IEEE1641 ATS Signal-Oriented Signal definition
Gou Xinyu Xiao Mingqing Wang Chengxiao
Air force Engineering University Engineering institute,Xian 710038 China
国际会议
西安
英文
2007-08-16（万方平台首次上网日期，不代表论文的发表时间）