CHARACTERISTICS OF HEAT TRANSFER AND PRESSURE LOSS OF THE POROUS MATERIALS FOR A SOLAR VOLUMETRIC AIR RECEIVER
Characteristics of heat transfer and pressure loss of fills for solar volumetric air receivers are experimentally investigated with the material and the thickness. In order to analyze the characteristics of heat transfer of the fills, the solar volumetric air receiver considered in this paper consists of a ceramic tube and fills inserted in the ceramic tube. Two materials, which are honeycomb (diameter: 100 mm, thickness: 300 mm and laminated mesh (diameter: 100 mm, thickness: 1 mm), are considered as the fills. This receiver is heated by an electric heater. The inner air temperatures of the ceramic tube are measured by thermocouples, which are installed at each layer of the ceramic tube. In order to study the pressure loss of the fills, the experimental apparatus, which is similar to the above experiment, is fabricated. An acrylic tube is used like as the ceramic tube of the above experiment. The pressure losses of the fills inserted in the acrylic tube are measured between front and rear of those by transmitter with the Reynolds number. The results show that the heat transfer and pressure loss characteristics of the laminated mesh are superior to those of the honeycomb.
Ja Hyun Cho Yong Kim Tae Beom Seo Yong Heack Kang
Department of Mechanical Engineering, Inha University, Inchon, Korea Korea Institute of Energy Research Daejeon, Korea
国际会议
2007世界太阳能大会(Proceedings of ISES Solar World Congress 2007)
北京
英文
2007-09-18（万方平台首次上网日期，不代表论文的发表时间）