会议专题

Application of Time-Ageing Time and Time-Temperature-Stress Equivalence to Nonlinear Creep of Polymeric Materials

Based on the observations that high temperature accelerates creep rate of polymer while physical ageing plays a reverse role, and that there is an analogy between the influences of stress and temperature on the intrinsic times of polymers, the time-ageing time superposition principle (TASP) and the time-temperature-stress superposition principle (TTSSP) are used to evaluate the long-term creep behavior of poly(methyl methacrylate) (PMMA). PMMA specimens were aged for 2 to 120 hours at identical temperature, their short-term creep strains with 2-hour test duration were measured under various stress levels ranging from 14 to 30 Mpa at room temperature, and modeled by means of time-ageing time equivalence and time-stress equivalence. The results show that the creep rate increases with stress, but decreases with ageing time. The ageing time shift factors vary with the stresses at which the shifts are applied. The ageing shift rate is independent on imposed stress in linear viscoelastic region, while it decreases with increasing stress when the material behaves in a nonlinear viscoelastic manner. The master creep compliance curve up to about 1-month at reference ageing time 120 hours and stress 18 Mpa, which is nearly 2.5 decades longer than the test duration, is constructed by shifting the creep curves horizontally along the logarithmic time axis. The result illustrates that TTSSP, combined with TASP, provides an effective accelerated test technique for long-term mechanical behaviors of polymers.

rheology ageing time-ageing time superposition principle time-temperature-stress superposition principle polymer

Rongguo ZHAO Wenbo LUO Qifu LI Chaozhong CHEN

Institute of Fundamental Mechanics and Material Engineering, Xiangtan University, Hunan 411105, P.R. Institute of Fundamental Mechanics and Material Engineering, Xiangtan University, Hunan 411105, P.R.

国际会议

The Fifth International Conference on Physical and Numerical Simulation of Materials Processing(第五届材料与热加工物理模拟及数值模拟国际会议)

郑州

英文

2007-10-23(万方平台首次上网日期,不代表论文的发表时间)