High-performance Top-emitting White Organic Light-emitting Devices
High-performance top-emitting white organic light-emitting devices (WOLED), using Al as the reflective bottom anode and LiF/Ca/Au as the semitransparent top cathode, were fabricated. Nanometers Au/V2O5 layer was deposited on Al anode for holes injection enhancement and the top cathode was capped with additional Alq3 layer as the dielectric capping layer for increasing its transmittance. Using three emissive layers with red, green, blue phosphorescent emitters respectively , the WOLED snowed a maximum external quantum efficiency of 9.1 % and a maximum power efficiency of 12.8 1m/ W. Broadband emission spectra with a very weak angular dependence were achieved. The emission in normal direction has a Commission Internationale de LEclairage coordinates of (x = 0.36, y - 0.43). The characteristics of this top-emitting WOLED are competitive with those of the corresponding bottom-emitting device.
Top-emitting WOLED High-performance
X. L. Zhu J. X. Sun X. M. Yu M. Wong H. S. Kwok
Center for Display Research and Department of Electronic and Computer Engineering, The Hong Kong University of Science and Technology,Clear Water Bay, Kowloon, Hong Kong, China
国际会议
上海
英文
1346-1350
2007-03-12(万方平台首次上网日期,不代表论文的发表时间)