Experiments of shear viscosity and interfacial tension of Orimulsion-400
The shear viscosity and interfacial tension of Orimulsion-400 were experimentally studied. The Orimulsion-400 was first dewatered and formulated into the simulated oil. Its shear viscosity and interfacial tension were then measured. The development tendency of shear viscosity of simulated oil is not in one direction. During the development process the value of the shear viscosity reaches a peak first, and then descends. The interfacial tension of simulated oil almost keeps unchanged as time passes. The interfacial tension of simulated oil is the lowest at the temperature of 30℃, then it rises when the temperature goes down and up. The result of fitting formula shows that when the temperature goes below 0℃ or above 80℃, the interfacial tension has mutation phenomenon. It may result in emulsion-breaking.
Yun Chen Ping Liang Xin-feng Long
School of Electricity Power, South China University of Technology, Guangzhou 510640, China School of Chemical Engineering and Energy, South China University of Technology,Guangzhou 510640, Ch
国际会议
The 5th International Conference on Nonlinear Mechanics(第五届国际非线性力学会议)
上海
英文
926-932
2007-06-11（万方平台首次上网日期，不代表论文的发表时间）