The Stannite Cu2ZnSnS4 Thin Films Prepared by Sulfurization of rf Magnetron Sputtered Metal Precursors
Cu2ZnSnS4 (CZTS) thin films for the absorber of thin film solar cells were successfully prepared by sulfurization of if magnetron sputtered metal precursors on soda-lime glass substrate. The CZTS thin films having the single stannite-type phase structure with good crystalline quality were obtained as revealed in XRD analysis when the conditions of preparation and sulfurization of the precursors were optimized. Hall effect and UV-VIS measurements showed that sheet resistivity, absorption coefficient and optical band - gap energy for the films prepared under the optimized processing conditions are about 0.073 Ω·cm, 104 cm-1 and 1.53 eV, respectively, indicating that the CZTS films prepared by sulfurization of sputtered metal precursor are suitable for the thin film solar-cell absorber.
Cu2ZnSnS4 thin film solar-cell if magnetron sputtering.
ZHANG Jun FU Yujun SHAO Dong SHAO Lex
School of Physical Science and Technology, ZhanJiang Normal University, Zhanjiang 524048, China;Scho School of Physical Science and Technology, Lanzhou University, Lanzhou 730000, China College of Biomedical Engineering and Instrument Science, Zhejiang University, Hangzhou 310027, Chin School of Physical Science and Technology, ZhanJiang Normal University, Zhanjiang 524048, China
国际会议
北京
英文
32-34
2006-08-03(万方平台首次上网日期,不代表论文的发表时间)