Thermodynamics and Interfacial Structure of TiAlp/Mg-Li-Al Matrix Composites
A new MgLiAl matrix composite with 10wt%TiAl particulates was developed by stir-casting, and its microstructures, properties and chemical compatibility were investigated systematically by XRD, TEM, HREM and material tensile teat.The results show that, there is a good connection between the Mg-Li matrix and TiAl particulates.There are no detectable chemic products on the interface after fabrication or subsequent heat treatment, and the interface between TiAl and MgLiAl alloy is not weakened after the heat treatment, and the thermodynamic potential for the reaction between the matrix and TiAl particulate is very low, the composite system is stability during fabrication or subsequent heat treatment.The composite has an improved tensile strength compared with matrix alloy, while a good ductility is kept.
composite chemical compatibility interface
XIA B.J WANG S.J.
School of Inner Mongolia University of Technology of Material Science and Engineering,Hohhot, Inner Mongolia 010051, China
国内会议
2016中国有色合金及特种铸造发展论坛(第3届有色合金及特种铸造技术国际研讨会、第十一届中国国际压铸会议、第九届中国铸造质量标准论坛)
上海
英文
93-99
2016-07-09(万方平台首次上网日期,不代表论文的发表时间)