Investigation of Burden Distribution in the Blast Furnace
In the ironmaking blast furnace a proper control of the burden distribution is important as this is the primary means of affecting the conditions in the upper part,the shaft,of the furnace,where the burden is heated and the indirect reduction of the iron oxides takes place.The present paper studies the charging of pellets and coke in the furnace both by experiments and mathematical modeling.A small-scale bell-less charging device is used to study the burden distribution experimentally for different charging programs.Corresponding programs are simulated using the discrete element modeling(DEM)approach.The results are compared and conclusions concerning the findings are drawn.The coke push effect,where lighter coke on the burden surface is shifted by charging of the heavier pellets,is also discussed.
blast furnace burden distribution discrete element method bell-less top ironmaking coke push
Tamoghna Mitra Henrik Sax(e)n
Thermal and Flow Engineering Laboratory,Faculty of Science and Engineering,(A)bo Akademi University,Biskopsgatan 8,FI-20500(A)bo,Finland
国内会议
上海
英文
1-12
2015-10-21（万方平台首次上网日期，不代表论文的发表时间）