MICROSTRUCTURES AND CONTINUOUS COOLING TRANSFORMATION OF CGHAZ IN E36 CLASS V-N-Ti, V-Ti AND Nb-Ti SHIPBUILDING STEELS
For the purpose of obtaining the optimal microstructures and mechanical properties of the CGHAZ under high input welding,continuous cooling transformation diagrams of the coarse grain heat-affected zone(CGHAZ)and the corresponding microstructures were investigated for a E36 class V-N-Ti,V-Ti,and Nb-Ti shipbuilding steels.The results indicated that the CGHAZ continuous transformation behaviors of Nb-Ti and V-Ti steel were similar,but the V-retard phenomenon was not as apparent as that of Nb.In addition,the cooling rate of ferrite transformation of V-Ti steel was higher than that of Nb-Ti steel.The nitrogen addition in the V-Ti steel enhanced the ferrite transformation,since that increasing the nitrogen could obtain fine(Ti,V)(C,N)particles and refine the original austenite size,which can promote the ferrite nucleation.The bainite transformation range of V-N-Ti steel was obviously lower than that of Nb-Ti,V-Ti steel at the t8/5≥100s.
Continuous cooling transformation CGHAZ Vanadium Niobium Nitrogen
Zhongran Shi Ruizhen Wang Qingfeng Wang Hang Su Feng Chai Caifu Yang
State Key Laboratory of Metastable Materials Science and Technology Yanshan University Qinhuangdao,0 Central Iron and Steel Research Institute,76 Xueyuan Nanlu,Haidian,Beijing,100081,China State Key Laboratory of Metastable Materials Science and Technology Yanshan University Qinhuangdao,0
国内会议
杭州
英文
517-523
2015-11-11（万方平台首次上网日期，不代表论文的发表时间）