Preparation of a RP-3-based Jet Fuel and Its Performance Evaluation
RP-3 jet fuel、 0 #diesel、-10 #diesels were chosen as base oil.Then series of approaches including oil refining,distillation and theoretical blending were taken to prepare more adequate jet fuel base oil according to the distillation range and basic indicators,and some additives were added when needed.Compared with RP-3,the density of modified jet fuel had increased by 2.1%~ 4.8%,net heat of combustion by 0.7% ~ 2%,flash point by 3 ~ 8 ℃,freezing point were all below-46 ℃,and the corrosion to silver and copper strip was rated level 1.In the end,the emission test of CO and NOx was conducted and it showed a promising improvement than RP-3 jet fuel.
jet fuel distillation blend pollution emissions
Qichen ZHANG Changjian XIONG Jine WANG Yuelin ZHU
School of Physics and Nuclear Energy Engineering,Beihang University,Beijing,P.R.China Key Laboratory of Aerospace Materials and Performance (Ministry of Education.).Beihang University,Be
国内会议
北京
英文
326-330
2011-10-20（万方平台首次上网日期，不代表论文的发表时间）