Synchronous Control System for Synthetic Test
Synthetic test is recognized as the most equivalent test to the high voltage circuit breaker breaking capacity test.In order to improve the success rate of the test, a synchronous control system is studied in this paper.Firstly, according to the demand of short-time and high-precision during the synthetic test, hardware circuit of the synchronous control system which uses DSP as the core is designed.Then, according to properties of the derivative, for the current approximately presents linearity near the zero area, the current model is simplified.The current zero is on-line predicted based on platform hardware circuit and real-time sampling.The trigger signal of the prolong-arc and voltage circuit are given.Finally, the performance of the intelligent device is verified in the test.According to the test result, error of trigger time for prolong-arc circuit is less than 40μs and for high-voltage circuit is less than 501μs, which can ensure the equivalence of synthetic test.
synthetic test synchronous control current zero forecasting
Jiang Yuan Wu Jianwen Wang Hefei
School of Automation Science and Electrical Engineering Beihang University Beijing 100191 China
国内会议
武汉
英文
23-26
2013-11-16（万方平台首次上网日期，不代表论文的发表时间）