The Tensile Properties and Resistivity of N i-based Alloy Fiber
(0) Nickel-copper based fibers with 0.11 mm and 0.10 mm diameter,respectively,were produced using a cold drawing process from a 1.0 mm diameter wire.The tensile properties and resistivity were analyzed in this study.The ultimate tensile strength was increased obviously after a cold drawing and the elongation of drawn fiber decreased significantly.The drawing process results in changing a ductile wire into a brittle fiber.Resistivity of fiber was higher than that of wire.However,the resistivity of the fiber decreased significantly after an annealing process.The effects of nickel-copper based fiber on the tensile properties and receptivity are obvious.
Nickel-copper based fiber tensile property resistivity
Tien-Wei Shyr Shih-Ju Huang Chun-Chieh Hu
Department of Fiber and Composite Materials, Feng Chia University, 100 Wenhwa Road,Seatwen, Taichung 40724, Taiwan
国内会议
太原
英文
132-135
2012-07-01（万方平台首次上网日期，不代表论文的发表时间）