Mechanical Stability Analysis of BPM Support at SSRF
This paper concentrates on investigating the mechanical stability of a Beam Position Monitor (BMP) support prototype of the Shanghai Synchrotron Radiation Facility (SSRF) project. Both nite element analysis and vibration measurements have been performed. Inconsistent results between the simulations and experiments motivate us to study three connections between the support and the ground: ground bolt (used in the initial design), part grout and full grout (proposed in the later research). After changing the connection, the rst eigenfrequency is increased from 20.2Hz to 50.2Hz, and the ratio of the integrated RMS displacement (4|50Hz) is decreased from 4.36 to 1.23 in the lateral direction. The mechanical stability is improved greatly.
vibration measurement Mechanical stability Finite element eigenfrequency Synchrotron
WANG Xiao CAO Yun CHEN Liang DU Han-Wen YIN Li-Xin
Mechanical Engineering Group of Shanghai Institute of Applied Physics,Chinese Academy of Sciences,Sh Department of Automation,Donghua University,Shanghai 201620,China
国内会议
杭州
英文
1-3
2007-09-15（万方平台首次上网日期，不代表论文的发表时间）