Study on Calibration and Validation of Full-Coupled Activate Sludge Model No.1 for AAO Process Simulation
According to the mechanism of microorganism growth, Full Coupled Activated Sludge Model No.1 (FCASM) which was modified from ASM3 Bio-P model by adding inhibition switching function was introduced. Both steady-state numerical simulation and dependent-time numerical simulation on computer was carried out. The effluent value of NH+ 4-N simulated by FCASM1 AND asm3 Bio-P are 1.90 g/m3 and 0 g/m3 respectively besides the measured effluent value is 1.50 g/m3. The result shows that FCASM1 correspond with the actual better than ASM3 Bio-P when the are employed in simulation fo the process for NH3-N removal. Such conclusion also can be obtained from the results of dependent-time numerical simulation. There are littler differences between FCASM1and ASM3 Bio-P when they are used for simulating the processes of COD and PO3- 4-P removal.
activated sludge model system coupled-effect organism oxidation FCASM1
SONG Yingqi SUN Peide WANG Ruyi
College of Environmental Science and Engineering, Zhejiang Gongshang University, Hangzhou 310035, Zhejiang, China
国际会议
2007环境科学与技术国际会议(The 2007 International Symposium on Environmental Science and Technology)
北京
英文
2007-11-13（万方平台首次上网日期，不代表论文的发表时间）