Operating Characteristics Test System for AC/DC Contactor
The operating characteristics test system of AC/DC contactor is introduced in this paper.It achieved phase selection in the making and breaking course of contactor by taking PIC16F887 as the core of control in hardware part.The voltage, current of coil and main circuit with three-phase contacts were obtained.With Keyence laser displacement sensor used, displacement of contact and iron core changing over time were achieved.Moreover, the sound signal making in the making course of contactor by electret microphone was captured.All signals mentioned above was transmitted to PC based on 12-bit data-acquisition with high accuracy and high-speed.Software part of system achieved intelligent data processing containing signal de-noising by wavelet, the spectrum analysis and extraction and localization of signal.With these means, it realized the measurement of parameters such as contact gap, over-travel, the arcing energy automatically.The test system can provide technical support for contactor studying and simulation, control strategy verifying of AC/DC contactor.It is of theoretical and practical significance in the design and development of AC/DC contactor.
test system phase selection the laser displacement sensor electret microphone contactor
Wengui Lin Zhihong Xu
School of Electrical Engineering and Automation Fuzhou University Fuzhou, China
国际会议
温州
英文
329-334
2014-11-16（万方平台首次上网日期，不代表论文的发表时间）