Roll Casting of Recycled AA5182

摘要：

　　Roll casting of the model alloy of recycled AA5182 aluminum alloy was investigated.Fe up to 0.6% was added to the AA5182 to make the model alloys of recycled AA5182.Increase of 0.6%of Fe means that the recycle was three times operated.A vertical type high speed twin roll caster was used.Some devices were operated on the twin roll caster to increase the cooling rate in order to make impurity fine.The roll speed could be increased up to 80m/min.The roll-castability did not become worse by the addition of the Fe.The LDR (limiting Drawing Ratio) was 1.9 when the Fe addition was 0.6.The deterioration of the mechanical properties by the addition of impurity Fe was very small.

关键词： twin roll caster roll casting recycle AA5182

作者: Toshio Haga Kosuke Komeda Kenta Mtsuoka Shinji Kumai Hisaki Watari

作者单位: Osaka Institute of Technology, 5-16-1Omiya Asahiku Osaka city 535-8585, Japan Graduate school of Osaka Institute of Technology, Japan Student of Osaka Institute of Technology, Japan Tokyo Institute of Technology, 4259 Nagatsuda Midoriku Yokohama city 226-8502, Japan Gunma University, 1-5-1 tenjin cho Kiryu city 376-8515 ,Japan

会议类型: 国际会议

会议名称: the Second International Conference on Frontiers of Manufacturing and Design Science(第二届制造与设计科学国际会议(ICFMD 2011))

会议地点: 台湾

会议语种:英文

页码: 4667-4670

在线出版日期: 2011-12-11（万方平台首次上网日期，不代表论文的发表时间）