Characterisation of TiC-NiMo reinforced NiCrBSi hardfacing
In the present research, TiC-NiMo composites were remilled to particle size of 250-315 μm and used as reinforcements for NiCrBSi alloy by plasma transferred arc hardfacing process. The manufactured hardfacing alloy was characterised in terms of microstructure, mechanical properties and high temperature impact-abrasion wear resistance. Deposition results indicate high quality thick coating with uniform distribution of hard cermet (TiC-NiMo) particles in the matrix, minimum level of hard particles dissolution and low porosity of the hardfacing. Cermet particles stay in initial form and consist of agglomerates (TiC and (Ti,Mo)C grains) embedded into Ni-based matrix. The manufactured TiC-NiMo reinforced hardfacing alloy shows high impact/abrasion wear resistance with constantly low wear rates in the testing temperature range between 20℃ and 700℃.
hardfacing cermet TiC wear NiCrBSi PTA
Zikin Arkadi Hussainova Irina Badisch Ewald Danninger Hertbert
AC2T research GmbH, Excellence Centre of Tribology, Wiener Neustadt, Austria Department of Material Department of Materials Engineering, Tallinn University of Technology, Tallinn, Estonia AC2T research GmbH, Excellence Centre of Tribology, Wiener Neustadt, Austria Institute of Chemical Technologies and Analytics, Vienna University of Technology, Vienna, Austria
国际会议
北京
英文
535-540
2012-10-23（万方平台首次上网日期，不代表论文的发表时间）