Performance and mechanism of poly-ferric sulfate for phosphorus removal in drinking water treatment
The performance and mechanism of poly-ferric sulfate (PFS) coagulant for phosphorus removal in drinking water treatment was researched. The test showed that the proportion of particulate phosphorus to total phosphorus was about 60％ in Zhuan river in Beijing. Coagulation experimental result showed that the more poly-ferric sulfate coagulant dosage was added in raw water, the better effect of phosphorus removal was obtained. The phosphorus removal efficiency was up to the highest with PFS dosage added at 40mg/L, and the color was down to the lowest with dosage added at 30 mg/L. Under the condition of pH 3.5～7, the best result was obtained for phosphorus removal, and the effect changed to worse when pH was beyond this scale.
poly-ferric sulfate phosphorus removal surface water coagulation
Junling Wang Cuimin Feng Guibai Li
School of Municipal and Environment Engineering,Harbin Institute of Technology,Harbin 150090,China;S School of Environment and Energy Engineering,BUCEA,Beijing100044,China School of Municipal and Environment Engineering,Harbin Institute of Technology,Harbin150090,China
国际会议
北京
英文
1-4
2009-06-11（万方平台首次上网日期，不代表论文的发表时间）