Experimental Study on Durability of Sliding Bearings under Long Duration Dynamic Loading
In this study, durability of sliding bearing (SB) for seismic isolation was investigated by repeated dynamic loading. Two types of SB-system were subjected to the testing, namely high-friction (HF) type with friction coefficient of 0.13, and low -friction (LF) type with 0.015, respectively. During the loading, the stainless plate is mounted on an heat-insulation plate to prevent heat transfer to the testing machine. The friction coefficient of HF type decreased according to the temperature increasing. However, even after large cumulative sliding displacement, the PTFE still maintained proper characteristics. On the other hand, in the case of the LF type with PTFE-coated mating plate, until firs half of the test, the friction coefficient maintained stable regardless to the temperature increasing, then gradually the coefficient increased mainly because of the pealing of PTFE-coating of the stainless plate. When using LF type SB, this phenomenon should be considered in design of isolation system. The study verified stable characteristics of both SB systems under long duration dynamic loading.
Base Isolation Sliding Bearing PTFE Repeated Loading Test Durability Heat
Ryuichi KOUSAKA Hironori HAMAZAKI Nobuo MUROTA Mineo TAKAYAMA
Engineer, Dept. of Structural Engineering, Azusa Sekkei Co. Ltd ,Tokyo, Japan Engineer, Dept. of Seismic Isolation Engineering , Bridgestone Co., Kanagawa, Japan Professor, Dept. of Architecture, Fukuoka University, Fukuoka, Japan
国际会议
14th World Conference on Earthquake Engineering(第十四届国际地震工程会议)
北京
英文
2008-10-12（万方平台首次上网日期，不代表论文的发表时间）