FUNDAMENTAL TESTS ON STRUCTURAL HEALTH MONITORING SYSTEMS BY USING RFID TAG WITH SENSORS
As described in this paper, to clarify the applicability of RFID tags with sensors to structural health monitoring systems, fundamental tests were carried out using RFID tags with sensors and built-in memory. An alternative system was used because RFID tags with sensors and built-in memory are under development in Japan. This system has almost identical performance to that of RFID tags and data communication is performed by wireless LAN. Sensors such as acceleration sensors and wire strain gages are used for structural health monitoring systems. Fundamental performances of these sensors were clarified through shaking table tests using four-story and two-story specimens. Fundamental characteristics of the proposed system and used sensors, and the applicability of RFID tags with sensors to structural health monitoring systems are discussed and clarified based on results of shaking table tests and Fast Fourier Transform (FFT) analyses.
Structural health monitoring Acceleration sensor Wire strain gage Shaking table tests RFID tag with sensors
Akinori Tani Yuichiro Yamabe Masashi Murakami Motoki UGAJI
Professor, Dept. of Architecture, Graduate School of Eng., Kobe University, Kobe, Japan Research Associate, Dept. of Architecture, Graduate School of Eng., Kobe University, Kobe, Japan Graduate Student, Dept. of Architecture and Civil Eng., Graduate School of Science and Technology, K Graduate Student, Dept. of Architecture, Graduate School of Eng., Kobe University, Kobe, Japan
国际会议
14th World Conference on Earthquake Engineering(第十四届国际地震工程会议)
北京
英文
2008-10-12（万方平台首次上网日期，不代表论文的发表时间）