会议专题

EFFECT OF AL2O3 MICROPARTICLES ON THE HEAT TRANSPORT CAPABILITY IN AN OSCILLATING HEAT PIPE

An experimental investigation was conducted to determine the microparticle effect on the heat transport capability of an oscillating heat pipe (OHP). The OHP was fabricated from copper tubing with inside diameter of 1.52 mm. The heat pipe consists of the evaporator, adiabatic section, and condenser. When heat load was added to the evaporator of OHP, the strong oscillating motion was generated. Due to the strong oscillation and circulation motions, the heat transport capability of OHP was significantly increased. The experimental results show that there exists an optimum volume ratio of microparticles added into the working fluid. The effects of filling ratio and tilted angle on the heat transport capacity were also conducted.

heat pipe micro particle heat transfer

Hongtao Gao Xiangyang Gao Hongbin Ma Anjun Jiao

College of Electromechanics and Materials Engineering Dalian Maritime University Dalian, China Department of Mechanical and Aerospace Engineering University of Missouri Columbia, MO 65211

国际会议

2007年微纳系统集成及其商业化应用国际学术会议(2007 International Conference & Exhibition on Integration and Commercialization of Micro and Nano-Systems)

海南三亚

英文

2007-01-10(万方平台首次上网日期,不代表论文的发表时间)